Employed in landslides, excavations, embankments, diaphragms, piles, load tests etc.
The inclinometer casings in ABS and PVC are used as guide tubes for the IN910 inclinometer system and for the IN930 fixed depth inclinometer, which allow check the movements of landslides, dams, embankments and structures in general.
For a correct inclinometric measurement it is necessary to take the utmost care in positioning the pipe and in gluing the sleeves between the pieces using the special glue supplied.
Once the assembly phase is complete, it is necessary to fill the gap between the hole and the pipe with a cement mixture or vibrated sand to make the pipe perfectly solid with the ground.
The upper end of the pipe must be protected to avoid damage and allow further measurements ensuring the reliability of the measurement.