Flow and Level

LV615

Piezometer with datalogger

LV615_piezometer_datalogger
water_icon

Water

software_icon

Management software

IP68_icon

Protection

durable_icon

Durable

economical_icon

Economical

Applications

Measurement of the level of the water table , measurement of the interstitial pressure .

Description

I LV615 series electric piezometers measure pressures, interstitial overpressures and water levels in wells, dams, canals and reservoirs.
The LV615 series is produced in 3 models:

  • LV615-AS1 absolute piezometer , capable of detecting interstitial pressures in the ground, equipped with 4×0.22 shielded electrical cable with marine grade scratchproof outer sheath.
  • LV615-AS2 absolute piezometer , able to detect interstitial pressures in the ground without cable, equipped with a hook for attaching a suspension cord.
  • LV615-RL relative piezometer , able to detect a hydrostatic pressure, equipped with 4×0.22 shielded electric cable with compensation tube atmospheric and sheath scratch-resistant marine grade exterior.

The piezometer, inserted in a well, performs a pressure measurement directly proportional to the height of the liquid contained in it. The electrical connection cable, being load-bearing, is fixed to the piezometer casing, allowing it to be inserted and recovered without problems. Inside the connection cable, a small tube connects the reference chamber of the transducer with the atmosphere, in order to compensate for variations in atmospheric pressure: the result is a relative pressure measurement.
In the -AS2 model the data acquisition unit and the battery are located inside the piezometer, while, in the -AS1 and -RL models, the data acquisition unit is located in head to the hole and the electrical connection cable of the piezometers is supplied in the desired length.
The MYLOG data acquisition unit is housed inside of a stainless steel container. The acquisition intervals are programmable from 1min to 24h. The WARM UP function is programmable from 1 to 60 seconds and allows to supply current to the instrument before taking the reading, in order to stabilize it. Upon connection, the MYLOG unit provides all the parameterization data stored inside, as well as the battery status. The data is saved in a FLASH memory capable of storing 128,000 data, as well as date and time. The datalogger is supplied with two rods, so that it can be fixed to the hole.
It is possible to connect the MYLOG unit to a GSM modem .

Downloads

Data sheet

Software

For information and quotes write us or call us at: +39 02 97003039

Related products

LV610_electric_piezometer

LV610

Electric piezometer

LV616_piezometer_datalogger

LV616

Piezometer with datalogger

LV617_piezometer_datalogger

LV617

Piezometer with datalogger

LV621_water_level_alarm_sensor

LV621

Water level alarm sensor